Quick Summary: Advanced Material Routing

Conveyor Splitters and Filters manage complex multi-line distribution in How They Built the Pyramids. Mechanical splitters divide an incoming conveyor flow into 2 or 3 equal streams, allowing one central quarry trunk to feed multiple pyramid courses simultaneously. Mergers consolidate separate feeder paths using priority logic, while sorting filters automatically separate raw clay, mud bricks, and carved limestone blocks into dedicated processing lines.

  • Splitters divide a single inbound conveyor lane into 2 or 3 equal streams.
  • Mergers prioritize full pallets to avoid stone block gridlock at bottleneck junctions.
  • Sorting filters separate raw clay, mud bricks, and carved limestone blocks.
  • Overflow gates route excess stones to secondary capstone holding buffers.

How They Built the Pyramids Material Sorting and Balancing

As your ancient industrial complex scales beyond early hand-carried bricks, multiple extraction points along the Nile produce varied materials concurrently: raw wet clay from riverbanks, unrefined rubble from bluffs, rough-cut limestone core blocks, and polished perimeter casing stones. If all materials are dumped onto a single unsorted belt line, workbenches will choke and brick kilns will starve for clay.

By integrating mechanical sorting filters directly into your reed conveyor belt highway, incoming payloads are physically inspected and directed based on size, density, and material type.

Routing Component Input Lanes Output Lanes Kinetic Power Requirement Core Functional Use Case
2-Way Mechanical Splitter 1 Belt 2 Belts (50% / 50%) Passive (Gravity / Belt Driven) Splits quarry trunk lines between North and South pyramid faces
3-Way Balanced Splitter 1 Belt 3 Belts (33% / 33% / 33%) Passive (Trip-Gate Alternator) Feeds 3 parallel masonry saw benches simultaneously
Priority Inbound Merger 2 or 3 Belts 1 Belt Requires Drive Shaft (>= 8 RPM) Merges quarry output with buffer crates, prioritizing main flow
Color-Coded Material Filter 1 Mixed Belt 1 Primary + 1 Filtered Requires Drive Shaft (>= 16 RPM) Diverts clay to mud kilns and limestone blocks to pyramid
Overflow Relief Hopper 1 Belt 1 Main + 1 Overflow Shute Passive Balance Gate Diverts surplus stones to buffer storage when pyramid line jams

Pairing sorting junctions with Shabti Work Posts allows automated helpers to replenish empty hoppers without human supervision.

How They Built the Pyramids Directional Splitter and Merger Ratios

Achieving flawless load balancing across the 2,601 blocks of Course 1 requires precise splitting ratios. A single quarry extraction zone powered by a 32 RPM drive shaft delivers 1.0 block per second. Feeding four active masonry teams requires a tiered tree layout:

1-to-4 Symmetrical Splitter Tree Blueprint:

  1. Primary Trunk: Connect the main reed conveyor belt carrying 1.0 block/sec from the central quarry.
  2. First Stage Splitter: Install a 2-Way Mechanical Splitter at the quarry exit, creating Branch A (0.5 blocks/sec) and Branch B (0.5 blocks/sec).
  3. Second Stage Splitters: Place another 2-Way Splitter on Branch A (feeding sub-branches A1 and A2 at 0.25 blocks/sec each) and on Branch B (feeding sub-branches B1 and B2 at 0.25 blocks/sec each).
  4. Terminal Delivery: Route lines A1, A2, B1, and B2 to the four corners of Course 1. All four builder crews receive perfectly balanced supplies with zero downtime.

When quarry lines produce faster than builders can place blocks, surplus materials can trigger line gridlock.

How They Built the Pyramids Overflow Hoppers and Gridlock Prevention

In How They Built the Pyramids, if a conveyor belt becomes full and cannot move forward, all upstream splitters lock in place. This backpressure can stall your entire waterwheel kinetic network.

  • Overflow Gate Logic: An Overflow Relief Hopper features a weighted pressure plate. When the downstream pyramid conveyor is clear, stone blocks pass straight through. The instant blocks back up, the spring-loaded gate trips, redirecting excess blocks down an inclined slide into a wooden holding crate.
  • Buffer Depletion via Mergers: Connect the holding crate output back into the main line using a Priority Inbound Merger set to Secondary Priority. Whenever quarry extraction pauses, the merger automatically pulls cached blocks from storage, keeping builders supplied at 100% capacity.
  • High-Altitude Diversion: As construction ascends to Course 15 and above, use overflow gates to route surplus blocks directly to siege trebuchet loading hoppers.

In 8-player cooperative worlds, assign a dedicated Logistics Engineer to inspect splitter gates and clear jammed junctions, as outlined in our Co-Op Team Roles Guide.

How They Built the Pyramids Splitters and Filters FAQ

How does a conveyor splitter balance stone delivery in How They Built the Pyramids?

Splitters operate on a round-robin mechanical gate, alternating each incoming stone block evenly between 2 or 3 output conveyor branches.

Can filters separate different types of construction materials?

Yes, setting a filter marker on a junction gate routes raw river clay to brick molds, rough blocks to core pyramid layers, and casing stones to outer perimeters.

How do conveyor mergers prioritize congested incoming lines?

Mergers feature a priority toggle; you can configure them to draw from the primary quarry line first and only pull from secondary buffer crates when main lanes run dry.

What happens when an output conveyor line becomes completely backed up?

Without overflow hoppers, backpressure stops the splitter mechanism; installing an overflow relief gate diverts excess blocks into holding chests to maintain belt motion.

How They Built the Pyramids Logistics Sorting Sources

Sorting ratios and overflow mechanics have been extracted from game simulation files and verified through factory builds:

  • Source 1: Advanced Automation, Drive Shafts, Belts & Shabti Setup Guide — Video transcript verification (release v1.0.3).
  • Source 2: In-Product Logistics Network Telemetry — Splitter trip-gate logic and priority merger ratios.
  • Source 3: Steam Community Factory Blueprints — Community tested 1-to-4 splitter load balance diagrams.

Advance to high-altitude stone ballistics in our Trebuchets & Catapults Guide or return to the Automation Hub.